ABOUT OUR MOUNTS
All mounts work with both the Versa Paddle and Gamut Paddle Holder.
Our mounts fit a range of kayaks, including sit-insides, sit-on-tops, SUPs, inflatables, tandems and folding kayaks. View our <comparison chart>, <demonstration videos> or list of <compatible kayaks> to see which is best for your type of kayak.
Whenever possible, we recommend using the Hinged Mount for sit-inside kayaks, as it provides the most (5-star) stability.
A mount is included in the price of your Versa or Gamut, though prices vary based on the type of mount.
If deciding between two mounts, it's generally best to choose the one with the higher star stability rating.
We have multiple post heights available that can be swapped out for the standard post that comes with each mount.
If you're unsure whether our mounts will fit your kayak, please contact us. We're happy to discuss substitute components that might work and will even brainstorm <custom> solutions.
HINGED MOUNT -
FOR SIT INSIDE KAYAKS
Considered the Cadillac of our mounts, the innovative Hinged Mount is unparalleled in both features and performance. Designed for sit-inside kayaks, it attaches at three separate points around the cockpit coaming to provide maximum stability while paddling.
A small hinge plate fastens to the front edge of the coaming and two stabilizing brackets attach to the side coamings. The length of both the vertical bar and the horizontal bars can be adjusted to fit a range of kayaks. Once attached, the Hinged Mount lifts upward for ease of entrance and exit. The ball joints on the horizontal arms gently rest in the side brackets. To ensure a safe wet exit, the arms easily pop out of the side brackets allowing the hinge to effortlessly swing open.
A short vertical post and base slip into the universal track on top of the mount to support the Versa Paddle or Gamut Paddle Holder. The base can be moved forward or backward for ideal positioning. The track system also accommodates other, such as a mounted camera. The Hinged Mount can be easily removed with the pull of a pin and used on another kayak; only the small hinge plate and side stabilizing brackets remain on the kayak.
a hinge plate fastens to the front edge of the coaming
HINGED MOUNT -
FOR SIT INSIDE KAYAKS
Considered the Cadillac of our mounts, the innovative Hinged Mount is unparalleled in both features and performance. Designed for sit-inside kayaks, it attaches at three separate points around the cockpit coaming to provide maximum stability while paddling.
The length of both the vertical bar and the horizontal bars can be adjusted to fit a range of kayaks. Once attached, the Hinged Mount lifts upward for ease of entrance and exit. The ball joints on the horizontal arms gently rest in the side brackets. To ensure a safe wet exit, the arms easily pop out of the side brackets allowing the hinge to effortlessly swing open.
A short vertical post and base slip into the universal track on top of the mount to support the Versa Paddle or Gamut Paddle Holder. The base can be moved forward or backward for ideal positioning. The track system also accommodates other, such as a mounted camera. The Hinged Mount can be easily removed with the pull of a pin and used on another kayak; only the small hinge plate and side stabilizing brackets remain on the kayak.
two stabilizing brackets (not shown) attach to the side coamings
HINGED MOUNT -
FOR SIT INSIDE KAYAKS
Considered the Cadillac of our mounts, the innovative Hinged Mount is unparalleled in both features and performance. Designed for sit-inside kayaks, it attaches at three separate points around the cockpit coaming to provide maximum stability while paddling.
A small hinge plate fastens to the front edge of the coaming and two stabilizing brackets attach to the side coamings. The length of both the vertical bar and the horizontal bars can be adjusted to fit a range of kayaks. Once attached, the Hinged Mount lifts upward for ease of entrance and exit. The ball joints on the horizontal arms gently rest in the side brackets. To ensure a safe wet exit, the arms easily pop out of the side brackets allowing the hinge to effortlessly swing open.
A short vertical post and base slip into the universal track on top of the mount to support the Versa Paddle or Gamut Paddle Holder. The base can be moved forward or backward for ideal positioning. The track system also accommodates other, such as a mounted camera. The Hinged Mount can be easily removed with the pull of a pin and used on another kayak; only the small hinge plate and side stabilizing brackets remain on the kayak.
FEATURES
5-star stability
Mount hinges up and out of the way during kayak entry and exit
Plastic compression nuts are used to adjust the bars to varying cockpit lengths and widths
The track enables the support post to slide for ideal positioning
Quick-release side brackets for safety
Pull pin to remove mount or move to another kayak
Includes optional gaskets for fitting hinge plate and side brackets
RECOMMENDED KAYAK SPECS
-
Works with sit-inside kayaks
-
Cockpit width between 18 – 26"
-
Cockpit length* between 36 - 57" (est)
-
1-2" mostly flat front coaming or deck
-
1" mostly flat coaming on sides of cockpit
*An extension bar is available for longer cockpits
ATTACHMENT METHOD
6-8 small <drill> holes around coaming for installation
Mount is easily removeable; only hinge plate and two side brackets remain
FEATURES
-
5-star stability
-
Mount hinges up and out of the way during kayak entry and exit
-
Plastic compression nuts are used to adjust the bars to varying cockpit lengths and widths
-
The track enables the support post to slide for ideal positioning
-
Quick-release side brackets for safety
-
Pull pin to remove mount or move to another kayak
-
Includes optional gaskets for fitting hinge plate and side brackets
RECOMMENDED KAYAK SPECS
-
Works with sit-inside kayaks
-
Cockpit width between 18 – 26"
-
Cockpit length* between 36 - 57" (est)
-
1-2" mostly flat front coaming or deck
-
1" mostly flat coaming on sides of cockpit
*An extension bar is available for longer cockpits
ATTACHMENT METHOD
-
6-8 small <drill> holes around coaming for installation
-
Mount is easily removeable; hinge plate and two side brackets remain
Maybe use an image and have lines and brief descriptions coming off it?? App - Image HotSpots, but not well reviewed
PLATE MOUNT
- FOR SIT-ON-TOP KAYAKS
To use Gamut or Versa on your sit-on-top kayak, the kayak must have a sufficiently-sized flat area between the paddler's legs, roughly 4 inches wide by 6.5 inches long, so that the mount can be secured. If there is a cup holder or hatch cover in the way, you may or may not be able to attach the mount directly over them. The flat attachment area must also be approximately an arm’s length from your body.
Our Plate Mount and track are secured to deck of the kayak using well nuts or rivets, and a short vertical post slips into them. The post can be moved forward or backward for ideal positioning. When not in use, the post can be removed and all that remains is the track, which can be used with RAM Mounts, YakAttack and Scotty mounting accessories, including rod holders and cameras. You can view our installation demo video here.
Because the Plate Mount does not have the benefit of side stability arms like the Hinged Mount, if you have access to the inside of the kayak (e.g. via a hatch) we recommended using a YakAttack Backing Plate and Rigging Bullets to attach our Plate Mount in the most secure manner. See our FAQs (How to Install Mounts) or our Shop page for details. The Plate Mount can be mounted without access to inside the sit-on-top kayak, and we include hardware for that purpose, however long-term, the system may not remain as stable as it would if secured internally.
Recommended Kayak Specs:
-
A flat area between paddler's legs, roughly 4 " wide x 6 " long, to attach the mount
-
The mounting area should be approximately arm's length from the torso, though track can be adjusted to accommodate the distance
Because the Plate Mount does not have the benefit of side stability arms like the Hinged Mount, many of our customers have found ways to modify our sit-on-top mounts to achieve stronger stability. See this blog for examples.
New Style of Mount Coming This Spring
New Style of Mount Coming This Spring
PLUNGER MOUNT & SPLINE -
FOR SIT-ON-TOP KAYAKS
To use Versa or Gamut on your sit-on-top kayak with the RAM Mounts plunger base and spline, the kayak must have a sufficiently-sized flat area between the paddler's legs, roughly 2 inches wide by 4 inches long, so that the mount can be secured. If there is a cup holder or hatch cover in the way, you may or may not be able to attach the mount directly over them. The flat attachment area must also be approximately an arm’s length from your body as you will not be able to adjust this mount forward or backward (unlike the Plate Mount which you can adjust).
.
The plunger mount is secured to the deck of the kayak with well nuts, and the spline and short vertical post slip into it. When not in use, the post can be removed and all that remains is the small RAM base mount which can be used with other RAM Mounts accessories such as cameras or rod holders.
Recommended Kayak Specs:
-
A flat area between paddler's legs, roughly 2 x 4 inches long, to attach mount
-
The mounting area should be approximately arm's length from the torso
Because the plunger mount does not have the benefit of side stability arms like the Hinged Mount, many of our customers have found ways to modify our sit-on-top mounts to achieve stronger stability. See this blog for examples.
INSTALLATION VIDEOS
Check out our three installation videos to understand how our mounts will work with your kayak. Click on the icon to view each.